Bar schedule
Purchasing
Weight per metre = π × d² / 4 × 7,850 kg/m³. Each piece is cut from a stock bar; offcuts are counted, then the margin is added.
Indicative estimate. Does not replace an engineering study.
Weight to order
129.03 kg
= 0.13 t
12 m bars to order
16 bars
Net weight (drawings)
100.62 kg
| Ø | m | bars | kg |
|---|---|---|---|
| HA8 | 66 | 7 | 33.15 |
| HA12 | 84 | 9 | 95.88 |
Indicative estimate. Does not replace an engineering study.
A useful number to share with your manager
Add a project name and copy a clear summary for your site manager, project lead or director.
The quantity is clear. What comes next?
Rochemère Systems connects your BOQ, purchasing, budget and actual costs in one project. Share this result with your team and explore a guided pilot.
Rebar weight table
Nominal mass of deformed bars by diameter, for a density of 7,850 kg/m³ and 12 m bars.
| Diameter (mm) | kg/m | 12 m bar (kg) | 12 m bars per tonne |
|---|---|---|---|
| HA6 | 0.222 | 2.66 | 375 |
| HA8 | 0.395 | 4.74 | 211 |
| HA10 | 0.617 | 7.40 | 135 |
| HA12 | 0.888 | 10.65 | 94 |
| HA14 | 1.208 | 14.50 | 69 |
| HA16 | 1.578 | 18.94 | 53 |
| HA20 | 2.466 | 29.59 | 34 |
| HA25 | 3.853 | 46.24 | 22 |
| HA32 | 6.313 | 75.76 | 13 |
Calculation reference
HA12: approximately 0.888 kg/m and 10.65 kg per 12 m bar.
Worked example
10 HA12 pieces of 7 m require 10 bars of 12 m without offcut reuse, before margin.
Things to check
Check overlap lengths and offcut reuse; the calculation treats each line separately.
Content reviewed on 04/10/2026
METHOD
An estimate you can verify
Net weight comes from the lengths on the drawings. The bar count assumes each line is cut separately from stock bars, with no reuse of offcuts between lines. For a piece longer than a stock bar, include the lap length in the piece length. The weight to order and the cost are for whole bars.
Technical sourceFAQ
How much does 12 mm rebar weigh per metre?
0.888 kg/m, or about 10.65 kg for a 12 m bar. The table above gives the other diameters.
Why is the weight to order higher than the net weight?
Rebar is bought in whole 12 m bars. Cutting offcuts and the safety margin add to the weight taken from the drawings.