Skip to main content

From DQE to décompte, your whole marché in one place.

Manage your construction contracts in Algeria: DQE, situations, décomptes and invoices, in DZD, French and Arabic.

Access is by invitation, and every company starts with a guided pilot.

Dashboard

Budget consumed is shown against the total budget in DZD, so you know where you stand before month-end.

Chantiers that drift off course are flagged before the décompte, not after.

One marché, from the first DQE line to the invoice

Rochemère is DQE software for construction that links each bill-of-quantities line to progress statements and the payment statement. You then create the invoice separately in Finances. The figures below are an example calculated by the same functions as your documents.

Marché 14/2025 · 40 housing units, structural works

  1. DQE

    The bill of quantities (DQE) sets the quantity and unit price of each line, and Rochemère uses it as the basis for every progress statement.

    Devis quantitatif et estimatifExample
    ItemQtyAmount excl. tax (DA)
    Reinforced concrete, superstructure420 m³13,440,000.00
    Hollow brick masonry, 15 cm2,800 m²6,720,000.00
    Interior cement render5,600 m²5,040,000.00
    Total excl. tax
    DA 25,200,000.00
  2. Ordres de service

    Service orders (ODS) record when work starts, stops and resumes, and Rochemère derives the stoppage days from them.

    Ordres de service registerExample
    1. ODS no. 1Start of works03/02/2025
    2. ODS no. 2Stop (bad weather)01/06/2026
    3. ODS no. 3Restart of works01/20/2026
    Stoppage days
    14 days
  3. Situation de travaux

    A progress statement values the progress of each DQE line from the previous cumulative amount. Quantities are entered directly or come from the measurements in the attachement.

    Situation no. 7Example
    ItemProgressCumulative (DA)
    Reinforced concrete, superstructure80 %10,752,000.00
    Hollow brick masonry, 15 cm55 %3,696,000.00
    Interior cement render20 %1,008,000.00
    Cumulative to date
    DA 15,456,000.00
    Previous cumulative
    − DA 13,104,000.00
    Work of the month
    DA 2,352,000.00
  4. Décompte

    The payment statement starts from the progress statement amount and keeps price revision and retention on separate lines.

    Décompte no. 7Example
    Work of the month
    DA 2,352,000.00
    Price revision (+2%)
    + DA 47,040.00
    Amount excl. tax
    DA 2,399,040.00
    TVA 19%
    + DA 455,817.60
    Retenue de garantie (5%)
    − DA 119,952.00
    Net payable
    DA 2,734,905.60
  5. Invoice

    You create the invoice in Finances with the payment statement amount excl. tax: it is not created automatically. It applies VAT per line (0, 9 or 19%) and calculates stamp duty under Algeria’s 2025 Finance Law when payment is made in cash.

    Invoice · paid by bank transferExample
    Amount excl. tax
    DA 2,399,040.00
    TVA 19%
    + DA 455,817.60
    Stamp duty (transfer)
    DA 0.00
    Total incl. tax
    DA 2,854,857.60

    Paid in cash, the same invoice carries DA 57,098.00 in stamp duty.

And the rest of the chantier

  • Budget and costs

    Actual costs are compared with the budget for each cost code, in DZD.

  • Procurement

    You track purchase orders, suppliers and deliveries.

  • Schedule

    Phases, tasks and milestones appear on a Gantt chart.

  • Subcontractors

    Each subcontractor has its own contracts and amounts.

  • Documents

    Drawings, minutes and contract documents are filed by chantier.

  • Teams

    Office and site work together, each person with their own role.

The site keeps the office informed, without a phone call

The site manager keeps the journal and attendance in Rochemère and sends messages, photos and voice notes to the office; without a network, these entries stay on the device and sync when Rochemère is open with a connection.

  • Transcribed voice notes

    The site manager speaks, Rochemère writes the transcript under the message.

  • Photos and locations

    Site photos and shared locations appear on the project map.

  • PDF reports

    A site report is generated from the conversation's messages.

40 housing units · BlidaExample

Karim MezianeSite manager08:12

Worker at a building site in front of brick walls under construction

The brick walls are progressing in this area.

Voice note0:42

Transcript

We've nearly finished the walls in this area. We still need two pallets of hollow bricks.

Shared location

36.4701, 2.8277

Amina BoudiafWorks supervisor08:20

Got it. Two pallets of bricks ordered, delivery Wednesday morning.

Amina BoudiafWorks supervisor17:40

Site report · week 37

Compliance with Algerian public contracts

Algerian public works contracts follow a set order: bill of quantities (DQE), measurement records, progress claims, then the statement (décompte). Rochemère follows this chain from the first measurement to the final statement, and each document carries the contract references.

  • Contract references on every document

    Each project carries the operation title, the lot number and title, the contracting authority, the supervising engineer, and the approvals of the procurement committee and the financial controller, with their number and date.

  • Official measurement records and progress claims

    Measurements are entered as a formula or as L × W × H × N, and the quantity of each item follows from them. Progress claims are numbered in order, and the official PDF gives the cover page and the detailed table.

  • Amendments and quantity control

    An overrun of the contract quantity needs a justification, or it is refused, depending on the chosen mode. An approved amendment adds its new prices to the next progress claims, and the app flags an amendment above 20% of the initial contract.

  • Retention and statement

    Retention is calculated on each statement, at the contract rate, on the amount before or after VAT. Advance repayment follows its threshold, and the contract VAT is 0, 9 or 19%. The price revision formula (fixed part and weighted indices) is stored with the contract, and the revision and the delay penalties each have their own line on the statement.

Excel, a generic ERP, or Rochemère?

Rochemère is an Excel alternative for construction that connects contract documents and DZD amounts in one tool, without manual tracking in Excel or a general-purpose ERP to adapt to Algerian construction.

DQE & unit price schedule (BPU)
ExcelFragile formulas, broken links
Generic ERPDepends on the product
RochemèreNative, line by line
Situations de travaux
ExcelRebuilt by hand every month
Generic ERPModule to adapt, depending on the product
RochemèreGenerated from progress or measurements
Révision des prix
ExcelChased in a spreadsheet
Generic ERPDepends on the product
RochemèreAdjustment tracked in the décompte
Décomptes & retenue de garantie
ExcelTracked by hand, money forgotten
Generic ERPConfigured to suit the marché
RochemèreUses your marché's rates and base
French & Arabic (RTL)
ExcelOne language per file
Generic ERPArabic depends on the product
RochemèreEvery screen, official PDFs in French
100% DZD
ExcelManual formatting
Generic ERPDepends on currency settings
RochemèreDefault everywhere

Start with a pilot on your own marchés

The pilot is free and by invitation: your teams try Rochemère on accompanied demo accounts, then we help you set up your company workspace.

Price
Free, no card, no commitment
Duration
30 days
Scope
One real marché, up to 5 users
Support
Setup call, your DQE imported from Excel, first situation produced together, a weekly check-in
  1. Tell us about your chantiers

    Reach us by call, message or email, then tell us about your marchés and how you bill today.

  2. Pilot with demo accounts

    Your teams try DQE, situations, décomptes and invoices on demo accounts.

  3. Guided onboarding

    We create your workspace, invite your teams and support you on your first marchés.

Frequently Asked Questions

Rochemère is construction site management software for Algerian companies that also covers construction billing, and here are the answers about billing, language, site work, the pilot, security and payment.

Does Rochemère handle Algerian construction billing (situations, décomptes, révision des prix)?

Yes, Rochemère is built for billing Algerian construction contracts: DQE, situations de travaux, décomptes, révision des prix, retenue de garantie and ordres de service are native workflows that are linked to each other.

Does it work in Algerian Dinar (DZD) and in French and Arabic?

Yes, every amount displays in DZD by default and the whole platform runs in French or Arabic, with a right-to-left layout in Arabic, so your teams work in the language and currency they already use.

Can I manage several chantiers at the same time?

Yes, a portfolio dashboard follows all your active projects, and you can open any chantier to see its cost, schedule and procurement details.

Can my chef de chantier work from the site?

Yes, Rochemère works on phone, tablet and desktop, and the site manager keeps the journal, attendance, material issues and photos from the chantier. Without a network, journal and attendance entries stay saved on the device and sync when the connection returns and Rochemère is open.

How do I get started with Rochemère?

You start with a free 30-day pilot, by invitation, with no card and no commitment. It covers one real marché and up to 5 users: a setup call, your DQE imported from Excel, a first situation produced together and a weekly check-in. We then set up your workspace and your teams. Contact us by call, WhatsApp or email.

Does the free pilot commit me to a subscription?

No, the free pilot commits you to nothing: after the 30 days, you keep your workspace on a paid plan or you leave with a full export of your data.

Is my data secure on Rochemère?

Yes, every connection is encrypted, and your data, your files and our backups are encrypted on our servers. Each company sees only its own data: the database blocks access from other organizations. Links to your files expire after a short time, and you can export all your data at any time.

If I pay late, will I lose access to my projects?

No, you never lose your data. If a payment is late, we notify the account owner and give 15 days to settle it. After that, the account becomes read-only: you and your teams can still open your projects and export all your data, but you cannot add or change anything until you pay. A late payment never leads to deleting your data.

Still have questions? Contact our team